Application of Flotation Machine :

Flotation Machine  can be used to separate non-ferrous metal, ferrous metal, noble metal, non-metallic mine, chemical material. It can be used in roughing, scavenging, selection or reverse flotation. In the flotation process, after being mixed with drug, some qualified mineral attaches on bubble, floats on the surface of slurry and is scraped out, other mineral still stays in the slurry, so the separating purpose is finished.

Flotation machine introduction line 

Forth flotation machine is applicable for separating non-ferrous metal, black metal, noble metal mineral, raw body and materials of  chemical industry, which are subject to coarse separation, swept separation, fine separartion and flotation, so the useful ore are reclaimed.

Features of Forth Flotation Machine:

The Flotation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and flotation separation, and the cells forms a flotation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.

Forth Flotation Machine Application:

Flotation machine is applicable for the separation of nonferous metal and ferrous metal, such as flourite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.

Main technical parameters

Company profile 

Henan Kuangyan Heavy Machiery Co., Ltd. is specialized in heavy equipment like various crushers, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.

Our company is headquartered in Zhengzhou Country's High-tech Industrial Development Zone, which consists of three branches, a research and development department. Since the establishment of the company, always adopt advanced modern management system, and focused on innovation, has brought together a number of scientific and technological elite, the company employees is more than 500people now, with 20 senior engineers, and more than 100 midding technicians. The company has long-term cooperation with domestic scientific research units, has introduced advanced technology, technics and testing system at home and abroad.

Our service:

1. Pre-sales services:

   1) Select proper equipment model; 

   2) Design and manufacture products according to clients' special requirement;

   3) Arrange for visiting our factory, assist them to handle relative procedure, such as visa.

2. Services during the sale: 

   1) Make sure goods prepared within delivery time;

   2) Pre-check and accept products ahead of delivery;

   3) Prepare documents required to help customer pass customs clearance;

   4) Help clients to make Project evaluation and feasibility analysis and draft solving plans.

3. After-sales services:

   1) Assist clients to prepare for the first construction scheme; 

   2) Install, debug and examine the equipment; 

   3) Train technical personnel the first-line operators;

   4) Provide technical exchanging;

   5) Offer spare parts at a best price for long term.

Note: Responsible for handling other required matters conforming the state regulations