Our company specializes in providing magnesium metal rotary kiln equipment and complete production process,craft materials (dolomite) become qualified materials (30 to 40mm) by the crusher, with a rotary kiln sintering, calcined into calcined dolomite, cooled by cooler, ground into a powder through the mill, and then press the ball machine pressed into a ball, after Crushing and with ferrosilicon powde (including silicon 75%) and fluorite powder (including GaF2)equal with 95%) mixed briquetting,load the heat-resisting stainless steel tank, placed reduction furnace at 1200.1250 L and vacuum 1.33Pa reduction from the system undervacuum crude magnesium, after refining flux, ingot, surface treatment to be finished ingot.

The working principle of Magnesium metal rotary kiln

1. magnesium metal rotary kiln equipment made by rotary cylinder device, supporting device, supporting device with a gear wheel and kiln head, sealing device of kiln end .Coal injection pipe device, etc.

2. kiln body with levels showed a certain slope, the entire kiln body supported by a roller device, and have the catch wheel device control the jump up and down of kiln body.

3. In addition to set the main drive transmission parts,but also Setup auxiliary transmission device to ensure that make the kiln rotated slowly to prevent deformation of kiln body when the main drive power supply is interrupted.

4. kiln head use shrouds seals, kiln end equipped with axial contact seal device, ensure the sealing reliability.

The process of magnesium metal rotary kiln

One, the raw material (dolomite)Be broken to the material passing (30-40mm). By crusher.

Two,with a rotary kiln sintering, calcined into Calcined dolomite.

Three, cooled by cooler.

Four, ground into a powder through the mill.

Five, and then press the ball machine pressed into a ball

Six, after crushing and with ferrosilicon powder (including silicon 75%) and fluorite powder (including GaF2) equal with 95%) mixed system group .

Seven, load the heat-resisting stainless steel tank, placed reduction furnace at 1200 -1250 tC and vacuum 1.33Pa reduction from the system undervacuum crude magnesium.

Eight, after solvent refining, ingot casting, surface treatment that will become magnesium ingot.

Application of  activated carbon rotary kiln

1) Rotary kiln is the key equipment in cement industry for calcining clinker.

2) It is also used in various industries, such as metallurgy, chemistry, building, refractory material, environmental protection, etc.

3) The kiln is composed of the cylindrical shell, roller supporting device with thrust roller, driving gear unit movable kiln hood, sealing device at kiln inlet, coal dust pipe device etc.

Types of activated carbon rotary kiln 

Rotary kiln belongs to building material equipment, and it can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials. 

Main technical parameters

Company profile

Henan Kuangyan Heavy industrial machiery Co., Ltd. is specialized in heavy equipment like various crushers, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.

Our company is headquartered in Zhengzhou Country's High-tech Industrial Development Zone, which consists of three branches, a research and development department. Since the establishment of the company, always adopt advanced modern management system, and focused on innovation, has brought together a number of scientific and technological elite, the company employees is more than 500people now, with 20 senior engineers, and more than 100 midding technicians. The company has long-term cooperation with domestic scientific research units, has introduced advanced technology, technics and testing system at home and abroad.

Our service:

1. Pre-sales services:

   1) Select proper equipment model; 

   2) Design and manufacture products according to clients' special requirement;

   3) Arrange for visiting our factory, assist them to handle relative procedure, such as visa.

2. Services during the sale: 

   1) Make sure goods prepared within delivery time;

   2) Pre-check and accept products ahead of delivery;

   3) Prepare documents required to help customer pass customs clearance;

   4) Help clients to make Project evaluation and feasibility analysis and draft solving plans.

3. After-sales services:

   1) Assist clients to prepare for the first construction scheme; 

   2) Install, debug and examine the equipment; 

   3) Train technical personnel the first-line operators;

   4) Provide technical exchanging;

   5) Offer spare parts at a best price for long term.

Note: Responsible for handling other required matters conforming the state regulations